Pictures from the 2010 racing season.
|
|
|
|
|
|
|
|
2009 Speedweek Pix in the 2010 SCTA-BNI Rulebook |
|
|
|
|
|
|
|
|
|
|
|
|
Burned Flywheel from April ECTA meet |
|
|
|
|
|
|
|
|
|
|
|
|
|
Burned Clutch and Pressure Plate |
|
|
|
|
|
|
|
|
|
|
|
|
The Pressure Plate got very hot |
|
|
|
|
|
|
|
|
|
|
|
|
|
New Quartermaster Twin Disc Clutch |
|
|
|
|
|
|
|
|
|
|
|
|
Quartermaster 7.25 from the side |
|
|
|
|
|
|
|
|
|
|
|
|
|
New Pressure plate installed |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Transmission open, Cork gasket. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Inside, what to do with the magnet? |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Went to hook the tranny to the engine, whoops! |
|
|
|
|
|
|
|
|
|
|
|
|
This is how much is needed, 10 MM |
|
|
|
|
|
|
|
|
|
|
|
|
|
gotta loose 10MM in this package |
|
|
|
|
|
|
|
|
|
|
|
|
and it has to fit in here. |
|
|
|
|
|
|
|
|
|
|
|
|
|
machine shop removed the 10 MM from the face of the Aluminum Flywheel |
|
|
|
|
|
|
|
|
|
|
|
|
a spacer was needed to locate the Button Flywheel on the pilot bearing(left side) |
|
|
|
|
|
|
|
|
|
|
|
|
|
Spacer and Pilot bearing in Place |
|
|
|
|
|
|
|
|
|
|
|
|
Button Flywheel centered. |
|
|
|
|
|
|
|
|
|
|
|
|
|
Flywheel(s) on the Engine |
|
|
|
|
|
|
|
|
|
|
|
|
Twin Disk Clutch bolted down |
|
|
|
|
|
|
|
|
|
|
|
|
|
Side View (doesn't look thinner does it) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
With the Flywheel shield installed |
|
|
|
|
|
|
|
|
|
|
|
|
Bottom look, for Tuff Pan Fans! |
|
|
|
|
|
|
|
|
